Robots

 

 

 

 

 

 

 

Peak Robotics is a USA Manufacturer of robots featuring open architecture PC-based controls. Our standard robot series is the innovative KiNEDx cylindrical coordinate robot. This platform has been adopted by several major OEM's and systems integrators, and installations are quickly expanding worldwide. The KiNEDx is available in several configurations including semi-custom designs for OEM's. We also are fully equipped to engineer complete custom robot solutions for special applications. 
   

KiNEDx Robot

KiNEDx Series: The KiNEDx-Series of laboratory robots are our standard "off-the-shelf" Cylindrical coordinate robots. Originally, these tabletop robots were designed specifically for handling microtitre plates for the life sciences industry. Because of its unique configuration and reliability, the arm is now being used in many other applications as well. The arm requires just a single serial RS-232 line from a PC and has no external controller. Standard horizontal travel is 300 mm (11.8") and vertical travel comes in three standard heights. The payload is rated to 2 kg (4.4 lb) and these robots are now available with an option for use in cold 4 degree C environments.

Inverted KiNEDx Robot

Inverted KiNEDx: The inverted KiNEDx Robot is designed for special overhead applications where deck space is limited. Common applications include inside glove boxes and liquid handlers. The safety release in the shoulder base is adjusted for use in the "hanging" configuration. Specifications and options are the same as the standard KiNEDx described above.    

5-Axis KiNEDx Robot

5-Axis KiNEDx: A 5th-axis actuator installed at the wrist of the robot allows the payload to be tilted and flipped. Common applications include: flipping plates for re-suspension, shaking or pouring flasks, tilting slides or plates for reading, etc. Special bracketry relocates the safety release mechanism on the wrist allowing both pneumatic and electric servo grippers to be used. The arm requires just a single serial RS-232 line from a common PC and has no external controller. Standard horizontal travel is 300 mm (11.8") and the payload is rated to 2 kg (4.4 lb.)

Semi-Custom Robots

SX-Series: The SX-Semi-Custom-Series encompasses a wide range of semi-custom robots for OEM applications needing special payload or environmental considerations. These semi-custom designs are AC servo robots and use standard off-the-shelf building blocks. They are based loosely on the 4-axis SCARA concept. Standard reach is 600 or 800 mm (23.6" or 31.5") and the payload ranges from 4 kg up to 34kg (9 lb to 75 lb.)

Engineered Robot Solutions

Custom-Engineered: Peak Robotics can engineer and build a special application Custom Robot in a wide range of configurations to meet your exact needs. These special robots can be manufactured in any quantity starting with one and going up to the hundreds.

Peak Robotics, Inc.
4143 Sinton Road, Colorado Springs, Colorado, USA, 80907
ph 1-719-598-3555                       fx 1-719-548-9227


   
Site © 1998-2009
    
Peak Robotics